Payment & Shipping Terms:
|Product Name:||Die Casting Mold Pipe Fitting Mould Die Pushing Bend Cored Bar||Material:||2520 ,2014, 304,45# Steel ,40# Steel,35# Steel|
|Making Method:||Casting ,forging||Process:||Heat Treatment|
die casting mold parts,
tube fitting mould
Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar
The main products include Φ108-Φ1420 thermal expansion steel pipe core rod, Φ18-Φ1219 push elbow core rod, Φ219-Φ2020 steel butt welding elbow mold, Φ18-Φ914 elbow mold (elbow core rod), Φ219-Φ1219 Pressure tee mold, Φ25-Φ1219 reducer pipe mold, Φ159-Φ630 cold push stainless steel mold. The main raw materials for production are stainless steel scrap, carbon steel scrap, non-ferrous metals and other auxiliary materials.
|Parts Specifications of Our Pipe Expanding and Pipe Fitiings Mould|
|Material||2520 ,2014, 304,45# steel ,40# steel,47# steel|
|Size||27mm ,33mm ,42mm ,48mm ,60mm,73mm,89mm ,102mm ,114mm,141mm ,168mm,219mm,273mm,324mm,356mm ,406mm ,457mm ,508mm ,559mm ,610mm ,660mm ,711mm ,762mm,813mm ,864mm ,914mm ,926mm ,1016mm ,1067mm ,1118mm ,1168mm ,1219mm|
|Pipe Fitiings Mould Type||Elbow Mould Die ,Tee Mould Die ,Cap Mould Die, Reducer Mould Die ,Pipe expanding Mould Die|
Advantage of Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar are as follows:
*High hardness and abrasion resistance surpasses the die steel, and does not strain the surface of the machined part.
*Compared with steel molds, it has good thermal conductivity and does not stick to molds, which can ensure uniform mold *temperature distribution during work, will not cause mold cracks due to local high temperature, and will not cause cold sweat, *exfoliation, and wrinkles in stretched products. phenomenon.
*Economic and practical, long life of core rod material.
*The core rod material processing technology is simple. Compared with steel molds, no direct heat treatment is required for direct polishing. Therefore, the heat treatment cost is reduced, the mold processing time is shortened, and the number of stretching times can be reduced and the cost of the mold can be reduced.
We Supply Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar and all kinds of corresponding molds and dies for all our Pipe fittings Machine. The mandrel and corresponding induction coil for elbow forming machine. The mandrel is mainly engineered from 18-8, 2520, K18, stainless steel and alloy steel. It allows for production of pipe elbows with diameter between 21 and 1,620mm, curvature radius of 1D-3D, and wall thickness of 5-80 mm.
The mandrel for Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar comes with an ox horn shape, and is necessary during the hot forming process. Due to the special shape design, it enables diameter expanding while creating the bending.
When the pipe section passes through the mandrel, the mandrel will be hold firmly via a holding mechanism.Then, a trolley, which may be hydraulically driven or mechanically driven via leadscrews, will be available to push the pipe section to move along the mandrel.Outside the mandrel, there is an induction coil which serves to heat the pipe section. After thorough heating, the trolley further pushes the pipe section to unload it, and thus a pipe elbow is created.Elbow sizing dies are specialised in sizing the dimension of the elbows after its first hot forming, the specification of the dies could be up to 2 metes in diameter, and it could also be manufactured based on the customised requirement and sketch.
Alloy mandrel mould and Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar for elbow hot forming.The utility model relates to an industrial forming mold for motor coil down lead lug, which belongs to the motor production, in particular to an universal elbow mold for motor coil coil down lead lug.
Tube , pipe fitting choice of hot-melt or bend, pipe fittings and hot-melt die.
The elbow shaping mold is made, and the upper and lower concave molds of the mold are made by standard symmetrical elbow products along the center plane of the elbow circle.
There is an approximately equal relationship between the inner diameter at the elbow groove of the mold and the outer diameter at the bevel of the shaping elbow.
The upper and lower die are welded to the support frame made of steel plate. The support frame is a box body welded with steel plates, which is mainly welded by the top plate, side plates and support plates.
A certain number of support plates are arranged in the middle of the box to radiate uniformly with the center of rotation of the upper and lower die. The semi-circular grooves and upper and lower die bends that are cut out in the middle of the support plate and match the outer diameters of the upper and lower die dies. Group welding of the outer surface of the head. The periphery of the support plate is welded to the top plate of the box.
The overall structure of the mold and Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar is stable and rigid, and the force transmission is evenly distributed. The process is simple, the cost is low, and the production cycle is short. You can also order any other models. Material. Bend mandrel
Our Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar and elbow mandrel head materials are generally ZG1Cr18Ni9Ti, ZG3Cr20Ni14, ZG1Cr25Ni20Si2, ZG0Cr20Ni25, etc., the high temperature strength and wear resistance have gradually increased, and the price has also increased accordingly.
Pushed elbow mandrel head is divided into single curvature, double curvature and multiple curvature according to the radius of curvature.
For single-curvature, double-curvature, and multi-curvature mandrels, the thrust force is gradually reduced, and the production cost is gradually increased. According to the cross-sectional shape, it is divided into two types: circular cross section and elliptical cross section. The circular cross section is simple to make and the cost is low, but the ellipticity and thinning rate of the elbow are too large. Different, the ellipse and thinning rate of the push elbow are small.
Heiyan chose a mandrel with an oval cross section. According to whether or not there is a shaping section, it is divided into a mandrel head with a shaping section and a mandrel head without a shaping section. The Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar mandrel with shaped section is complicated to manufacture, high cost and long use time; the mandrel without shaped section is simple to manufacture and low cost.
And the mandrel and Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar material used in our factory has the characteristics of wear resistance, bending resistance and strong impact resistance, and the surface is bright and clean, suitable for the extrusion of copper, iron, aluminum, zinc, stainless steel and other metals.
The Packing of Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar:
Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar Basic Introduction:
HY Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar is a kind of mandrel used for pipe expansion and extubation, and a mandrel mold that promotes the forming of steel pipes.
The hot-expanded steel pipe forming process uses a special pipe expanding machine, a core mold (commonly known as a mandrel) and a heating device (commonly known as a heating coil), so that the blank set on the mold is moved forward by the pusher, and is moved during the movement. Process of heating and expanding. The diameter of the used pipe is smaller than the diameter of the pipe to be obtained. The deformation process of the blank is controlled by the core mold, so that the compressed metal at the inner arc flows to compensate for other parts that are thinned due to the diameter expansion, so that the wall thickness is uniform. Heat expanded steel pipe.
Performance characteristics of our Die casting mold Pipe Fitting Mould Die Pushing Bend Cored Bar:
The hot-expanded steel pipe forming process has the characteristics of beautiful appearance, uniform wall thickness and continuous operation, which is suitable for mass production. Therefore, it has become the main forming method for carbon steel, alloy steel and stainless steel pipe expansion. The opposite process is extubation. The thicker steel pipe is drawn into a thinner pipe by a process, and the steel pipe produced by this process is called drawing pipe. Materials are carbon steel, stainless steel and alloy steel. After the steel pipe undergoes the thermal expansion process, its material is unchanged. Welded pipes and seamless pipes can be applied to this process!
Contact Person: Linda
Product Name: Tee Production Tee Shaping cold forming machines Pipe Fitting Mould Diec
Tee Production Tee Shaping cold forming machines Pipe Fitting Mould Die Material: 2520 ,2014, 304,45# steel ,40# steel,35# steel
Making Method: casting ,forging
Tee Production Tee Shaping cold forming machines Pipe Fitting Mould Die Process: heat treatment
Product Name: Carbon Steel Pipe Fitting Die Forming Mould Shaping Mould calibration mould
Carbon Steel Pipe Fitting Die Forming Mould Shaping Mould calibration mould Material: 2520 ,2014, 304,45# steel ,40# steel,35# steel
Carbon Steel Pipe Fitting Die Forming Mould Shaping Mould calibration mould Making Method: casting ,forging
Carbon Steel Pipe Fitting Die Forming Mould Shaping Mould calibration mould Process: heat treatment