Payment & Shipping Terms:
|Motor Power:||N=7.5KW||Speed Of The Knife Dish:||Four Files 31、59、86、161rpm|
|Processing Outside Diameter:||159- 800mm||Processing Of Wall Thickness:||10-180mm|
|The Angle Head:||0-37.5 °||Lateral Travel:||400mm|
|Transverse Regulation:||±50mm||Axial Rapid Feed:||±302mm/min|
|Can Be Machined Groove Form:||V, Double V, U, X||Cutter Diameter:||D=850MM|
|Center Height Of Machine Tool:||H=1150mm|
OD800mm Pipe Beveling Machine,
OD159mm Pipe Beveling Machine,
7.5KW Pipe Beveling Machine
OD159- 800mm Fully Automatic Three Kinds Of Speed Pipe Beveling Machine
Q1280 - Ⅱ electric groove machine is to learn all kinds of pipe groove machine production advantages and the users need to design, suitable for 159-800 - mm diameter and wall thickness of 10-180 - mm straight pipe groove processing.
This machine is the key equipment for groove machining of pipe end before pipe welding. It has strong cutting force and easy operation.Durable.The power head outputs four-speed spindle speed and three kinds of differential tool holder feed speed through gear change. The power head is equipped with an electric tool holder quick advance and retreat mechanism, which can be used separately or at the same time with differential feed.The installation Angle of the tool holder on the tool holder plate is adjustable from 0° to 37.5°.The bed body is equipped with electric longitudinal feed, manual horizontal alignment adjustment mechanism, bed body and supporting plate components. The electric longitudinal feed has two kinds of progress: fast forward and working forward. The two speeds can work separately or simultaneously or in reverse.The machine adopts the workpiece V-shaped seat and the attached machine bracket to place the workpiece, the electric lifting up and down adjustment, the manual horizontal alignment adjustment, the hydraulic cylinder lifts and clamps the pipe fitting, the maximum cutting is 5 ~ 8mm, which can guarantee the groove processing quality. The machine is also equipped with a rolling bracket, using a longer pipe to support, the center can be aligned up and down;The electrical components are installed in the special electrical box, and the operating elements are installed in the suspended operating box. Each action of the machine can be operated on the operating table.
|Revolution of cutter head(rpm)||600||350||200||150||100||80||40|
|Feeding turn volume(mm/r)||0.25||0.25||0.25||0.25||0.25||0.25||0.25
Contact Person: BREEZE BAE