Medium Frequency Induction Heating 30mm Elbow Cold Forming Machine

Medium Frequency Induction Heating Elbow Cold Forming Machine

Now the ship, petrochemical, gas and other industries are developing rapidly, in these industries, the pipeline system is necessary, and among them
Used to transport liquid or gas pipe elbow demand is also more and more, so elbow processing methods and productivity
It's becoming more and more important.Elbow processing methods have a lot of, cold push made of technology is a very widely used
Working method.
When the mandrel elbow forming hydraulic press is used to produce elbow, the tube billet is first sawed and blanked, and then cold is used
Push the processing method for mass production, and then the elbow groove for processing.This method of production process is very simple, production
High efficiency, fine products, no need for excessive polishing, for the operator, can also reduce the labor intensity,
In the production process will not produce a lot of surplus material, but the shape of opening material is complex.Mandrel hydraulic press of the main working process
The clamping cylinder should be closed and the mould should be locked. When pushing the workpiece, the clamping cylinder is always in the clamping state.
Wait until the end of the push, the locking cylinder to open the mold.For medium and small carbon steel, stainless steel elbow can be used elbow molding special
Hydraulic press for production, the production of elbow wall thickness uniformity, good quality, for reducing elbow pipe fittings, can also be used
Elbow forming hydraulic press for production.

The main features are as follows:
1. This series of machines are divided into two forms, the integral frame type and the four-column split structure, which have the advantages of strong rigidity, beautiful appearance, stable and reliable performance, etc.
2. The machine adopts proportional hydraulic control system, which has the advantages of energy saving, low noise, stable transmission and long service life.The hydraulic system adopts high quality sealing, sealing performance is good, ensure no leakage completely.
3. Electrical PLC programmable controller, touch screen, sensor can realize man-machine interface control, instead of the original console and display, with data display and parameter setting and storage functions, give people a more direct visual sense, easier to operate.
4. There are three operation modes: inching, manual and automatic.Each operation mode can be adjusted by the transfer switch.
5. This series of machine electrical components, hydraulic accessories, pump valves and other main components are adopted domestic and foreign well-known brands, in line with the CE standard.
6. This machine has unique demoulding mechanism and mould design, making mould adjustment convenient and quick.

I.Elbow Cold Forming Machine Main USES and features
Cold bend forming machine is mainly suitable for stainless steel pipe fittings, special equipment and pushed into the 90 ° elbow molding method for side ejector push straight in the main mode of bending on the mandrel, and equipped with an automatic stripping device will bend off from core rod, the electric system adopt PLC control, hydraulic system adopts cartridge valve, convenient maintenance, simple operation, high production efficiency.

II.Elbow Cold Forming Machine The unit structure
The equipment is mainly composed of main engine, hydraulic station, electric control cabinet and limit device

Elbow Cold Forming Machine Specifications:

1.Production Range:od21mm-310mm

2.Raduius:1d,1.5d

3.Thickness:3mm-18mm

4.Material:Stainless steel 

5.Drive type:Hydraulic

Accessories for the progress

1.Mandrels

2.Moulds

3.Hydraulic oil