Column Metal Roller Feeding 4kw Horizontal Band Saw Machine

Column Efficient Metal Roller Feeding Loading Style G400 Band Saw Machine

In order to ensure the operator's personal safety and extend the service life of the sawing machine and blade, the company hereby formulates the following rules, and the operators must strictly abide by the rules:

1. Before the operation to wear tight protective clothing, cuff button, the bottom of the coat can not be opened, gloves are strictly prohibited, not in the machine tool in operation, take off clothes, or around the body, to prevent the machine wound.

2. Make all preparations (check the circuit, oil circuit, oil level and saponification water level to keep all parts normal) before the machine is started, and install the vise so that the saw center is in the middle of the saw stroke.The raw material is placed horizontally on the vise, at right angles to the saw blade;If you want to saw bevel, first adjust the vise to the required Angle, the size of the saw shall not be larger than the maximum size of the machine.

3, the size of the new tension when the blade is installed should be controlled between 25 to 35 nm, to improve the effect of saw belt use, change every time when new blade, should be first to running-in, namely in the first few incisions should use low speed, cutting the small feeding, after being tooth burr removal, then according to the normal cutting parameters on cutting (carbon steel cutting speed should be controlled between 45-90 (m/min)).

4, sawing machine saponification liquid to be thickened, the cutting process saponification water outlet to be larger, chip should be removed in time, so as not to block the sawtooth, affect the cutting effect and saw life.

5, in the use of the process such as broken saw blade, re-install the new saw blade to not cut the steel to turn over and then cut, if not turned by the old saw seam to continue to cut the saw blade is easy to break again.The saw blade of big steel should choose a little bigger, small steel saw blade should choose a little smaller, generally broken saw blade should not be used in automatic sawing machine.

6. After every day's work, the band saw blade should be relaxed to improve its service life.Wipe the machine, keep the machine parts of cleanliness, improve the level of civilized production.

Rotation Angle band sawing Machine G-400 Performance characteristics:

1 sealed unique maintenance-free deceleration system, equipped with turbine structure, to maintain long-term lubrication, ensure the stable operation of the saw belt, can extend the life of the saw belt.

2. Unique belt protection device reduces the fracture of the belt to a great extent.

The sawing machine has adjustable belt guide device, which ensures smooth operation of the saw belt and greatly improves cutting quality and service life of the saw belt.

4 with a variety of safety circuit protection functions, only when the safety links of the machine tool meet the requirements, can start the machine tool for cutting.

5 can be 0-45 degrees multi-angle fast positioning cutting.

Using cutting stroke switch control, cutting stroke can be adjusted according to the size of the workpiece at any time, greatly improving the work efficiency.