140mm Diameter Elbow Cold Forming Machine 11 - 110KW Motor Power Stable Working

Suitable for the production of seamless 140mm diameter and welding elbow forming cold bending machine

1. Product Presentation

Before the use of the cold push elbow machine to check whether the power switch is normal, hydraulic oil is not prepared enough.Check whether there is any damage to the press mould and whether the height meets the requirements.Check whether the press mold is installed in place and should be fixed firmly.Adjust the Angle positioning frame to the appropriate position, put the electric heat neatly in the die to start the bending machine to make sure that the Angle of the bend is in place before taking it out and replacing it with the other end to repeat the above actions.Mark the processed products.The equipment must be carefully checked that there is no product or foreign body in the die before starting.After the device is opened, it is strictly forbidden to put your hand into the die or the rod stroke.In the production process, if there is an abnormal situation, the power should be cut off first to confirm the shutdown and then check.After production, the power switch should be turned off and the site cleaned.
The cold push elbow machine is required to have the function of automatic feeding, by the tube conveying device according to the time 60 seconds to the elbow machine feeding mechanism feeding.One feed at a time, the elbow machine can carry out the next push without waiting after the completion of a push. In addition, in order to make the elbow fall from the core mold in the same direction, without chaos.The blanking end can be used to receive material from the lower die of elbow calibrating die. After manually adjusting the elbow position, the blanking end can be directly sent to the online calibrating machine through the conveying system. The blanking end structure of the corresponding elbow machine must meet the working requirements.The contactor, fuse, wiring terminal and other components of the elbow machine produced by xinxin are imported products, while the components of other components are high-quality products made in China.When the elbow machine is shut down, the cooling circulating water pump must be allowed to continue working, and the pump can only be stopped when the temperature of the core die part falls to normal.The elbow machine produced by our company is safe and reliable, easy to operate, stable and not prone to failure.