Payment & Shipping Terms:
|Motor Power (KW):||30KW||Slide Stroke (mm):||200mm|
|Working Speed:||10-24mm/s||Nominal Pressure (KN):||360KN|
|Return Force (KN):||300KN||Weight (T):||65T|
tee forming equipment,
steel tee making machine
Manufacturing for pipe installation diameter 168 inch carbon steel stainless steel tee cold push tee machine
The main parts and components of the tee machine
Tee machine is mainly oil pump, motor, PLC control box, water tank, the corresponding model mold composition.
Tee machine body belongs to non-standard products, so there is no detailed specifications and models, we can customize the
tee machine according to the customer's request.
The diameter of the tee is 21mm-630mm and the wall thickness is 3mm-20mm.
Mechanical tee and ordinary tee function difference.Mechanical tee is divided into groove mechanical tee and screw
mechanical tee.It can be used to connect branch pipe directly on the steel pipe, and has many applications on the device of
fire pipe and spray pipe.In demand for diversion or confluence can be used mechanical tee.
Device method first in the steel pipe with a hole opening machine hole, and then the mechanical three card hole, hole by
the sealing ring along the wall of the tube.Mechanical tee wire connection and groove type two.When connecting the three
mechanical connections, the clearance between the three mechanical connections and holes should be checked.Mechanical tee
hole spacing shall not be less than 1m.
The hydraulic power mechanism of the three-way machine is installed above the fuselage, oil pump, motor, cartridge valve
integration block, fuel tank and other components, the power mechanism includes oil filtration, cooling, oil temperature
oil level display and other devices.The main oil pump is a constant power input plunger pump, and the output flow can vary
with the pressure.
Electrical control system of tee machine: tee machine is equipped with an independent electrical control cabinet, and the
main operation button station is suspended on the fuselage.Tee machine adopts PLC controller.The three-way
electromechanical source is AC380V, the 50HZ control power supply is AC220V, and the electromagnet power supply of each
valve is DC24V.
The tee machine can produce carbon steel, alloy steel, stainless steel, copper and so on
|Tee OD range||lnch||1~4||3~6||4~8||8~12||10~16||20~28|
|Go down speed||mm/s||60||80||80||80||80||80|
|Work forward speed||mm/s||8~12||8~12||8~12||8~12||8~12||8~12|
|Return stroke speed||mm/s||80||100||100||100||100||100|
|Return stroke speed||mm/s||60||60||60||60||60||60|
|Right and left||mm||550||750||900||1200||1400||1800|
|Front and back||mm||400||580||800||1000||1200||1500|
|The max distance from slide block to workbench||mm||190||250||370||460||520||650|
|Center high of side cylinder||mm||980||1100||1350||1800||1900||2500|
1. Hydraulic Tee Forming Press/tee making machine has rigid construction assures highly reliable operation.
2. Adopt Germany technology.
2. Special hydraulic circuit design improve working efficiency.
3. High efficiency and low noise hydraulic system can save energy and improve working environment.
Contact Person: Linda