New Condition Medium Frequency Power Supply System For Induction Heater

Kgps Medium Frequency Power Supply For Machine Induction Heater

 

 

Features of the KGPS Kgps Medium Frequency Power Supply For Machine Induction Heater:

• The furnace body is made by thick aluminum alloy shell to reduce the magnetic leakage and ensure furnace body strength.

• The thick T2 standard tube is taken use for induction coil to provides high melting efficienccopper y.

• Open type furnace hearth reduces moisture,and design cooling rings on the bottom, which extend the furnace lining life time.

• The titling is controlled by reducer gear box. The remote control panel can set the furnace in any position when titling. The max tilting angle is 95 degrees.

 

More Products except of our Kgps Medium Frequency Power Supply For Machine Induction Heater :

Elbow Forming Machine , Elbow Cold Forming Machine ,

Pipe Bending Machine , Hydraulic Press Machine ,Pipe Expanding Machine , Tee Forming Machine , Pipe Beveling Machine , Shot Blasting Machine , Band Saw Machine , Medium Frequency Power Source , Pipe Fitting Mould , Steel Pipe Fittings , Aluminum melting furnace IGPS , KGPS power supply , Ciosed cooling tower

 

Advantages of Our Heiyan Kgps Medium Frequency Power Supply For Machine Induction Heater

1. Energy saving:

The power factor reaches 0.99 under the condition of full power output. The integrated circuit board is adopted and the current and voltage are adjusted internally. The core components are high performance, high density and large-scale ASIC integrated circuit produced in the United States, which are digitized. The rectifier trigger part does not need any adjustment, and has the advantages of high fraud reliability, high pulse symmetry, strong anti-interference ability and fast response speed.

2. Big reactor design:

Strong filtering ability, greatly reduce harmonic pollution to the grid, suppress the current mutation, protect the transformer.

3. Large section area of current carrying discharge:

Select 8×60 copper row, large cross-sectional area, strong current carrying capacity, reduce heat.

4. Cabinet uses RITTAL brand:

Durable and beautiful

5. Appliances: SCHNEIDER brand

6. Button: IDEC brand

7. Insulating plate:Durable and high insulation grade, beautiful

8. Water segregator: Stainless steel

9. Cooling water pipe: Specially customized, high temperature and high pressure

10. Inverter increase resistance and capacity absorption: it can effectively suppress the instantaneous oscillation and high-frequency current of operating overvoltage, so that the waveform of overvoltage becomes slow, the steepness and amplitude are reduced, plus the damping effect of resistance, so that the high frequency oscillation rapidly attenuates.

 

NOTE:

Please do not touch any exposeed electric components and induction coils when it is starting work .Please close system if repair or moving . Refuse electrocute!

 

Brife Introduction of Kgps Medium Frequency Power Supply For Machine Induction Heater:

KGPS Series Thyristor transducer is a quiescent device to change Three phase alternating current energy into Single phase Intermediate Frequency electric energy. This kind of device is apply to induction diathermy,melting,quenching.

 

Production Description of Kgps Medium Frequency Power Supply For Machine Induction Heater 

1) Turn on and turn off easily,and power failure.

2) Adopt constant power to control the circuit, maintain constant power while malting, and keep faster melting rate.

3) Set up over voltage, over current and water deficient protector, and run safely.

4) The motherboard adopts CAD technology, integrated circuit board, low-fault-rate, easy-manipulating,effortless maintenance.

5) Zero voltage starts up softly, high initial over, no impact for the electric network.

6) Apply to melting ferrous metal and non-ferrous metal like copper, aluminum, brass, steel,iron,stainless steel etc...

 

Technical Parameter of Kgps Medium Frequency Power Supply For Machine Induction Heater:

 

Model	Input power(kw)	Semlting capacity(T)	Smelting(T/H)
KGPS-50	50	0	0
KGPS-100	100	1/9	1/9
KGPS-160	160	1/7	1/5
KGPS-250	250	1/4	1/3
KGPS-300	300	2/7	3/8
KGPS-400	400	1/2	5/9
KGPS-500	500	3/4	7/9
KGPS-750	750	1	1
KGPS-1000	1000	1 1/2	1 1/2
KGPS-1400	1400	2	2
KGPS-2000	2000	3	2 4/5
KGPS-3000	3000	5	4 2/7
KGPS-4000	4000	7	7
KGPS-4500	4500	8	7 1/2
KGPS-6000	6000	10	10 7/9

 

 

 

APPLICATIONS of our Kgps Medium Frequency Power Supply For Machine Induction Heater:

 

 

Preheating of forging, Heat treatment, Brazing, Melting, Shrink-fit and preheating of pipe bending,Elbow Pushing,Pipe Expanding

 

 

APPLICATIONS of our Kgps Medium Frequency Power Supply For Machine Induction Heater:

 

A. Heating (hot forging, hot fitting and smelting):

B. Heat Treatment (surface quench):

It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:

C. Welding (braze welding, silver soldering and brazing)

It mainly aims to melt the solder by heating it to a certain temperature for the purpose of connecting two types of metals of the same material and different

D. Annealing (tempering and modulation)

Electric Board

The main control circuit board is the core component of the machine.high quality. We have many stocks.

Main control circuit board as the main part of the machine, we made in their research and development, and adopted by the company and built since the automatic welding and testing equipment to ensure that each set of machine can achieve the best effect, and we have main control board in stock lone time, can satisfy the parts supply problems.

Induction coils

The induction coil inside the furnace body is treated with two insulations. The first spray of high temperature insulation paint. The second round of glass fiber tape. The service life of the treated furnace lining and induction coil will increase by more than two times.

 

Features of the our Kgps Medium Frequency Power Supply For Machine Induction Heater     :

• Easy operation:

A full time operator specially for power supply is not needed .There is only one switch for turning on or off and one power adjustment knob. After started, the only thing that needs to be done is rotating the power adjustment knob to the largest location, others are controlled by the device itself.

• Safety protection functions of induction melting furnace:

1. The main circuit and short circuit protection

2. SCR overvoltage protection

3. Main circuit phase fault protection

4. The main circuit phase loss protection

5. Low water pressure protection

6. SCR overcurrent protection

• Highly reliable electrical control board

In the operation, the 3-phase current is balanced. Due to the advanced design, the 3-phase power supply's sequence could be connected randomly. Moreover there is no limit to connect to capacitor cabinet and furnace. All of these jobs can be judged to be adapted automatically by the device itself. It makes the installation and maintenance very easily.