PLC Control System Tee Forming Machine 3050*2550*5800mm Compact Structure

PLC control system tee cold automaic forming machine from China
 
 
Tee forming machine technology is to use the tube blank as the raw material, by applying the liquid pressure in the tube cavity and applying the load in the axial direction, make it plastic deformation in the mold cavity, the tube wall and the inner surface of the mold, so as to obtain the forming technology of the required shape parts.Difficult for small size of fillet, molding products tend to adopt sectional pressure forming, namely first complete the expansion pipe, with smaller pressure line into a large rounded corners, have maintained uniform wall thickness at this time, then the pressure increase, forcing fittings mold joint, the rounded materials tensile deformation, the tube wall thinning, finally get the tee forming principle of tee forming machine: first, put the tube blank into the lower die cavity, press the plunger push head into both ends of the pipe fitting under the action of hydraulic cylinder, so that the pipe fitting cavity is sealed, and then inject the liquid medium into the pipe fitting cavity through the liquid channel in the push head;At this point, the upper mold moves downward, forming a closed mold cavity together with the lower mold. Finally, the pressure of high-pressure pump and valve control liquid increases continuously, and the push head pushes the pipe fitting inward. The pipe wall deforms and gradually sticks to the inner wall of the mold, forming the tee.
 

 
tee machine is mainly oil pump, motor, PLC control box, water tank, the corresponding model mold composition.Tee forming machine body belongs to non-standard products, so there is no detailed specifications and models, we can customize the tee machine according to the customer's request.The diameter of the tee is 21mm-630mm and the wall thickness is 3mm-20mm.Mechanical tee and ordinary tee function difference.Mechanical tee is divided into groove mechanical tee and screw mechanical tee.It can be used to connect branch pipe directly on the steel pipe, and has many applications on the device of fire pipe and spray pipe.In demand for diversion or confluence can be used mechanical tee.Device method first in the steel pipe with a hole opening machine hole, and then the mechanical three card hole, hole by the sealing ring along the wall of the tube.Mechanical tee wire connection and groove type two.When connecting the three mechanical connections, the clearance between the three mechanical connections and holes should be checked.Mechanical tee hole spacing shall not be less than 1m.