24mm/S Carbon Steel 30kw 24 Inch Tee Forming Machine

24 Inch Carbon Steel / Alloy Steel Tee Forming Machine

This model of tee elbow forming machine is used for manufacturing Carbon/Stainless tee, the whole machine welded by high quality plate, to make sure it have high structural strength. Easy for operation and maintenance.

Tee molding machine is used for carbon steel, stainless steel pipe into a special hydraulic machine, suitable for a variety of specifications of tee pipe fitting joint extrusion molding change the position of the cylinder, can be processed and manufactured 90 degrees, 135 degrees and other angles of tee pipe joint.The diameter of the tee is 21mm-630mm, and the wall thickness is 3mm-20mm.Hydraulic system of three-way forming machine is hydraulic power mechanism installed on the top of the fuselage, by pump, motor, cartridge valve integration block, fuel tank and other components, the power mechanism includes oil filtration, oil temperature oil level display and other devices.The output flow of the main oil pump is constant power and can vary with the pressure.The structure of the three-way forming machine is the optimized design of the whole frame fuselage to ensure the strength, the welding parts for non-destructive flaw detection, after welding operation aging treatment, to ensure the complete elimination of stress, equipment in use without deformation.Tee machine is provided with T row groove under the slider and above the work table for mounting the mold.The dead point lock device on the slider is provided to prevent the slider from sliding.The power mechanism is placed on the top of the machine, and the top of the fuselage is provided with a safety platform and a fence.Slide guide adopts non-recovery type automatic circulation thin oil ruiyu sliding, and is equipped with oil box and fault display device.

2. Hydraulic system

After sales service:

1.After the prepayment, the seller provide basic layout, equipment hydraulic principle diagram, electrical diagram, a set of instructions. For installation, the buyer is responsible for the cost of transport and living fees, and pay the technical personnel installing and training expense per people per day 100 USD.

2.The whole equipment warranty 12 months. Hydraulic components and electrical components warranty 3 months. (for non-human factors)

3. Prepared by Buyer: